Auth-mac reauth-relearning 5, Auth-mac reauth-relearning – Allied Telesis AT-FS970M Series User Manual

Page 1085

Text mode
Original mode

AT-FS970M Switch Command Line User’s Guide

1085

AUTH-MAC REAUTH-RELEARNING

Syntax

auth-mac reauth-relearning

Parameters

None

Mode

Port Interface mode

Description

Use this command to set the MAC address of the supplicant (client device)
to re-learning for re-authentication on the interface specified in the
INTERFACE command.

Example

This example sets the MAC address of the supplicant to re-learning for re-
authentication on port 1.0.23:

awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.23
awplus(config-if)# auth-mac reauth-relearning