Allied Telesis AT-FS970M Series - Manual (Page 437)

437
Chapter 24
Link-flap Protection Commands
The link-flap protection commands are summarized in the following table:
Table 41. Link-flap Protection Commands
Command Mode Description
“LINK-FLAP DURATION” on
page 438 Global Configuration Specifies the time period for link-flap
events.
“LINK-FLAP PROTECTION”
on page 439 Port Interface Activates link-flap protection on the ports.
“LINK-FLAP RATE” on
page 440 Global Configuration Specifies the number of link state
changes that constitute link-flap events.
“NO LINK-FLAP
PROTECTION” on
page 441 Port Interface Disables link-flap protection on the ports.
“SHOW LINK-FLAP” on
page 442 User Exec and
Privileged Exec Displays the status and settings of link-
flap protection on the switch.