Log console – Allied Telesis AT-FS970M Series User Manual
Page 674
Chapter 44: Event Log Commands
674
LOG CONSOLE
Syntax
log console [level
level
]|[program
program
]|[msgtext
msgtext
]
Parameters
level
Specifies the minimum severity level of the event messages. The
levels are listed in Table 77 on page 672.
program
Specifies the event messages of a particular management
software module. The modules are listed in Table 79 on page 683.
To specify more than one module, separate the modules with
commas.
msgtext
Specifies a text string with double quotations around to match the
event messages. This string is case sensitive and must be the last
text on the command line.
Mode
Global Configuration mode
Description
Use this command to specify the types of event messages to be sent to
the console. You can filter the messages by specifying severity level,
management software module, a text-string within the message or a
combination of some or all of these.
The available severity levels are listed in Table 77 on page 672, and the
management software modules is in Table 79 on page 683.
Confirmation Command