Allied Telesis AT-FS970M Series - Manual (Page 1171)

AT-FS970M Switch Command Line User’s Guide
1171
SNMP-SERVER
Syntax
snmp-server
Parameters
None
Mode
Global Configuration mode
Description
Use this command to activate SNMPv1, SNMPv2c, and SNMPv3 on the
switch. The switch permits remote management from SNMP applications
when SNMP is enabled. The switch also sends SNMP messages to trap
and inform receivers.
Confirmation Command
“SHOW SNMP-SERVER” on page 1166
Example
The following example activates SNMPv1, SNMPv2c, and SNMPv3 on the
switch:
awplus> enable
awplus# configure terminal
awplus(config)# snmp-server