beautypg.com

No snmp trap link-status 2, No snmp trap link-status – Allied Telesis AT-FS970M Series User Manual

Page 1142

background image

Chapter 72: SNMPv1 and SNMPv2c Commands

1142

NO SNMP TRAP LINK-STATUS

Syntax

no snmp trap link-status

Parameters

None

Mode

Port Interface mode

Description

Use this command to disable the transmission of SNMP link status
notifications (traps) when ports establish links (linkUp) or lose links
(linkDown) to network devices.

Confirmation Command

“SHOW INTERFACE” on page 229

Example

This example disables the transmission of link status notifications on ports
17 and 21:

awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.17,port1.0.21
awplus(config-if)# no snmp trap link-status