Allied Telesis AT-FS970M Series - Manual (Page 1777)

1777
Chapter 101
QSP Commands
The QoS Storm Control Protection commands are summarized in
Table 247 and described in detail in this chapter.
Table 247. Quality of Service Commands
Command Mode Description
“SHOW MLS QOS INTERFACE
STORM-STATUS” on page 1778 Privileged Exec Displays the storm status for the
specified port.
“STORM-ACTION” on page 1780 Policy Map
Class Sets the action to take when triggered
by QoS Storm Protection (QSP).
“STORM-DOWNTIME” on page 1782 Policy Map
Class Sets the number of seconds before
the port is re-enabled.
“STORM-PROTECTION” on
page 1783 Policy Map
Class Enables the policy-based QoS Storm
Protection feature.
“STORM-RATE” on page 1784 Policy Map
Class Sets the data rate criteria for triggering
the storm action.
“STORM-WINDOW” on page 1786 Policy Map
Class Sets the frequency that data is
sampled.