Allied Telesis AT-FS970M Series - Manual (Page 717)

717
Chapter 48
Static Port Trunk Commands
The static port trunk commands are summarized in Table 84 and
described in detail within the chapter.
.
Table 84. Static Port Trunk Commands
Command Mode Description
“NO STATIC-CHANNEL-GROUP” on
page 718 Port Interface Removes ports from existing static
port trunks and deletes trunks from
the switch.
“PORT-CHANNEL LOAD-BALANCE”
on page 719 Static Port
Trunk Interface Sets the load distribution methods of
static port trunks.
“SHOW STATIC-CHANNEL-GROUP”
on page 721 User Exec and
Privileged Exec Displays the specifications of the
static port trunks.
“STATIC-CHANNEL-GROUP” on
page 722 Port Interface Creates a new static port trunk and
adds ports to an existing static port
trunk.