Allied Telesis AT-FS970M Series - Manual (Page 654)

Chapter 42: DHCP Snooping Commands
654
SHOW IP DHCP SNOOPING BINDING
Syntax
show ip dhcp snooping binding
Parameters
None
Mode
Privilege Exec mode
Description
Use this command to display all dynamic and static entries in the DHCP
snooping binding database.
Example
This example displays entries in the DHCP snooping database:
awplus> enable
awplus# show ip dhcp snooping binding
See Figure 125 for a sample display of this command. SeeTable 73 on
page 655 for an explanation of the parameters in this display.
Figure 125. SHOW IP DHCP SNOOPING BINDING Command
awplus# show ip dhcp snooping binding
DHCP Snooping Bindings:
Client
MAC Server Expires
IP Address Address IP Address VLAN Port (sec) Type
---------------------------------------------------------------------------
1.2.3.4
aaaa.bbbb.cccc -- 7 1.0.10 Infinite Stat
1.2.3.6 any -- 4077 1.0.10 Infinite Stat
1.3.4.5 any -- 1 sa1 Infinite Stat
111.111.100.101 0000.0000.0001 111.112.1.1 1 1.0.10 4076 Dyna
111.111.101.108 0000.0000.0108 111.112.1.1 1 1.0.10 4084 Dyna
Total number of bindings in database: 5