Allied Telesis AT-FS970M Series - Manual (Page 979)

979
Chapter 63
MAC Address-based VLAN Commands
The MAC address-based VLAN commands are summarized in Table 103
and described in detail within the chapter.
Table 103. MAC Address-based VLAN Commands
Command Mode Description
“NO VLAN” on page 980 VLAN
Configuration Deletes VLANs from the switch.
“NO VLAN MACADDRESS (Global
Configuration Mode)” on page 981 Global
Configuration Removes MAC addresses from
VLANs.
“NO VLAN MACADDRESS (Port
Interface Mode)” on page 982 Port Interface Removes MAC addresses from
egress ports.
“SHOW VLAN MACADDRESS” on
page 984 Privileged Exec Displays MAC address-based VLANs.
“VLAN MACADDRESS” on page 986 VLAN
Configuration Assigns names and VIDs to new
VLANs.
“VLAN SET MACADDRESS (Global
Configuration Mode)” on page 988 Global
Configuration Adds MAC addresses to VLANs.
“VLAN SET MACADDRESS (Port
Interface Mode)” on page 990 Port Interface Adds MAC addresses to egress ports.