Allied Telesis AT-FS970M Series - Manual (Page 1623)

AT-FS970M Switch Command Line User’s Guide
1623
SHOW TIME-RANGE
Syntax
show time-range
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the time settings which are set with the
TIME-RANGE, ABSOLUTE, PERIODIC, and PERIODIC (Daily)
commands. See “TIME-RANGE” on page 1624, “ABSOLUTE START” on
page 1542, “PERIODIC” on page 1615, and “PERIODIC (DAILY)” on
page 1617.
See Figure 252 for an example of the SHOW TIME-RANGE display. This
display shows that time-range t1 has an absolute start (immediately
effective start) time of 9 pm on June 5, 2012 and time-range t2 has an
absolute end (immediately effective end) time of 3 pm on August 11, 2012.
Figure 252. SHOW TIME-RANGE Command
Example
This command displays the time settings:
awplus# show time-range
awplus# show time-range
Time-Range
t1
absolute start 21:00:00 05 June 11
Time-Range t2
absolute end 15:00:00 05 August 11