beautypg.com

Snmp trap link-status 6, Snmp trap link-status – Allied Telesis AT-FS970M Series User Manual

Page 1156

background image

Chapter 72: SNMPv1 and SNMPv2c Commands

1156

SNMP TRAP LINK-STATUS

Syntax

snmp trap link-status

Parameters

None

Mode

Port Interface mode

Description

Use this command to enable SNMP to transmit link status notifications
(traps) when ports establish links (linkUp) or lose links (linkDown) to
network devices.

Confirmation Command

“SHOW INTERFACE” on page 229

Example

This example configures the switch to transmit link status notifications
whenever links are established or lost on ports 1 to 4:

awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.1-port1.0.4
awplus(config-if)# snmp trap link-status