Allied Telesis AT-FS970M Series - Manual (Page 1779)

AT-FS970M Switch Command Line User’s Guide
1779
Confirmation Command
None
Example
This example displays the storm status for port 5:
awplus# show mls qos interface port1.0.5 storm-status
Storm Action Indicates the action the interface takes
when triggered by the QSP feature. The
choices are portdisable (disable the port),
vlandisable (disable the VLAN), and
linkdown (shuts down the port).
Storm Window Indicates the frequency that traffic is
measured to determine if storm protection is
activated. The range is from 100 to 6,000
ms.
Storm Downtime Indicates the time, in seconds, the port is
reenabled after being disabled by the QoS
storm protection feature.The range is from 1
to 86,400 seconds.
Timeout Remaining Indicates time in seconds.
Last read data-rate Indicates the most recent data rate in kbps.
Storm Rate Indicates the data rate criteria for triggering
the storm action. The range is 1 to
10,000,000 kbps
.
Table 248. SHOW MLS QOS INTERFACE STORM-STATUS Command
Description (Continued)
Field Description