Allied Telesis AT-FS970M Series - Manual (Page 1294)

Chapter 77: LLDP and LLDP-MED Commands
1294
SHOW LLDP STATISTICS INTERFACE
Syntax
show lldp statistics interface [ port ]
Parameters
port
Specifies a port. You can specify more than one port.
Mode
User Exec mode and Privileged Exec mode
Description
Use this command to display the LLDP statistics for the individual ports.
Here is an example of the information.
Figure 219. SHOW LLDP STATISTICS INTERFACE Command
The information the command displays is explained in Table 134.
Table 134. SHOW LLDP STATISTICS INTERFACE Command
Statistic Description
Frame Out Number of LLDPDU frames transmitted
by the port.
Frame In Number of LLDPDU frames received by
the port.
Frame In Errored Number of invalid LLDPDU frames
received by the port.
LLDP Packet and Event counters:
Port 2.0.2
Frames: Out ................... 15
In .................... 12
In Errored ............ 0
In Dropped ............ 0
TLVs: Unrecognized .......... 0
Discarded ............. 0
Neighbors: New Entries ........... 1
Deleted Entries ....... 0
Dropped Entries ....... 0
Entry Age-outs ........ 0