Allied Telesis AT-FS970M Series - Manual (Page 1825)

AT-FS970M Switch Command Line User’s Guide
1825
SHOW IP INTERFACE
Syntax
show ip interface
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the routing interfaces on the switch.
Figure 277 is an example of the information.
Figure 277. SHOW IP INTERFACE Command
The fields are described in Table 252.
Table 252. SHOW IP INTERFACE Command
Parameter Description
Interface The VID of the VLAN to which the routing
interface is assigned.
IP Address The IP address and mask (in decimal
notation) of the routing interface.
Status Status of the routing interface.
Interface IP Address Status Protocol
VLAN14 123.94.146.34/24 admin up running
VLAN25 123.94.152.72/24 admin up running
VLAN26 123.94.126.4/24 admin up running
VLAN28 123.94.111.37/24 admin up running