Allied Telesis AT-FS970M Series - Manual (Page 329)

AT-FS970M Switch Command Line User’s Guide
329
SHOW IPV6 INTERFACE
Syntax
show ipv6 interface
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the IPv6 management address on the switch.
Figure 74 is an example of the information.
Figure 74. SHOW IPV6 INTERFACE Command
The fields are described in Table 31.
Example
The following example displays the IPv6 management address:
awplus# show ipv6 interface
Interface IPv6-Address Status Protocol
VLAN3-0 832a:5821:b34a:0:0:0:187:95a/64 admin up down
Table 31. SHOW IPV6 INTERFACE Command
Parameter Description
Interface The VID of the VLAN to which the
management address is assigned.
IPv6 Address The IPv6 management address of the
switch.