beautypg.com

Lldp timer 7, Lldp timer – Allied Telesis AT-FS970M Series User Manual

Page 1257

background image

AT-FS970M Switch Command Line User’s Guide

1257

LLDP TIMER

Syntax

lldp timer

interval

Parameters

interval

Specifies the transmit interval. The range is 5 to 32768 seconds.

Mode

Global Configuration mode

Description

Use this command to set the transmit interval. This is the interval between
regular transmissions of LLDP advertisements. The transmit interval must
be at least four times the transmission delay timer, set with “LLDP TX-
DELAY” on page 1262.

Confirmation Command

“SHOW LLDP” on page 1279

Example

This example sets the transmit interval to 60 seconds:

awplus> enable
awplus# configure terminal
awplus(config)# lldp timer 60