beautypg.com

Passive-interface 3, Passive-interface – Allied Telesis AT-FS970M Series User Manual

Page 1873

background image

AT-FS970M Switch Command Line User’s Guide

1873

PASSIVE-INTERFACE

Syntax

passive-interface

vlanid

Parameters

vlanid

Specifies the ID number of a VLAN.

Mode

Routing Configuration

Description

Use this command to prevent the transmission of routing updates through
the routing interface in the specified VLAN. The routing interface in the
VLAN does not receive routing updates, but the network that the specified
VLAN belongs to is still advertised.

Confirmation Command

“SHOW IP RIP” on page 1875

Example

The following example blocks the transmission of routing updates through
the routing interface in VLAN 8:

awplus> enable
awplus# configure terminal
awplus(config)# router rip
awplus(config-router)# passive-interface vlan8