Allied Telesis AT-FS970M Series - Manual (Page 427)

AT-FS970M Switch Command Line User’s Guide
427
SHOW ESTACK REMOTELIST
Syntax
show estack remotelist [name] [series]
Parameters
name
Sorts the list of switches by the host name.
series
Sorts the list of switches by the model name.
Mode
Privileged Exec mode
Description
Use this command on the command switch to display the member
switches of an enhanced stack. You may sort the names by MAC address,
host name, or model series. The default is MAC address. An example is
shown in Figure 95.
Figure 95. SHOW ESTACK REMOTELIST Command
The list does not include the command switch on which you entered the
command.
Note
This command only works on the command switch of the stack. It
does not work on member switches.
Examples
This example displays the member switches of an enhanced stack by
MAC address:
awplus> enable
awplus# show estack remotelist
numOfNodes 2
Num
Mac Address Name Mode Version Model
-------------------------------------------------------------------------
01
eccd.6d4d.6dd5 dutC Member AWPLUS v2.3.1.0 AT-FS970M/24C
02 eccd.6d4d.6dd0 dutB Member AWPLUS v2.3.1.0 AT-FS970M/48