Allied Telesis AT-FS970M Series - Manual (Page 153)

AT-FS970M Switch Command Line User’s Guide
153
HOSTNAME
Syntax
hostname name
Parameters
name
Specifies a name of up to 39 alphanumeric characters for the
switch. Spaces, punctuation, special characters, and quotation
marks are not permitted.
Mode
Global Configuration mode
Description
Use this command to assign the switch a name. The switch displays the
name in the command line prompt, in place of the default prefix “awplus.”
Example
This example assigns the name “Sw_Sales” to the switch:
awplus> enable
awplus# configure terminal
awplus(config)# hostname Sw_Sales
Sw_Sales(config)#