beautypg.com

Storm-control – Allied Telesis AT-FS970M Series User Manual

Page 249

background image

AT-FS970M Switch Command Line User’s Guide

249

STORM-CONTROL

Syntax

storm-control broadcast|multicast|dlf level

value

Parameters

broadcast

Specifies broadcast packets.

multicast

Specifies multicast packets.

dlf

Specifies unknown unicast packets.

level

Specifies the maximum number of ingress packets per second of
the designated type the port will forward. The range is 0 to
33,554,431 packets.

Mode

Port Interface mode

Description

Use this command to set maximum thresholds for the ingress packets on
the ports. Ingress packets that exceed the thresholds are discarded by the
ports. Thresholds can be set independently for broadcast packets,
multicast packets, and unknown unicast packets. To view the current
thresholds of the ports, refer to “SHOW RUNNING-CONFIG” on page 166.

To remove threshold levels from the ports, refer to “NO STORM-
CONTROL” on page 221.

Confirmation Commands

“SHOW STORM-CONTROL” on page 241

“SHOW RUNNING-CONFIG” on page 166