beautypg.com

Fctrllimit – Allied Telesis AT-FS970M Series User Manual

Page 211

background image

AT-FS970M Switch Command Line User’s Guide

211

FCTRLLIMIT

Syntax

fctrllimit

fctrllimit

Parameters

fctrllimit

Specifies the number of cells for flow control. A cell represents 128
bytes. The range is 1 to 7935 cells. The default value is 7935 cells.

Mode

Port Interface mode

Description

Use this command to specify threshold levels for flow control on the ports.

Confirmation Command

“SHOW RUNNING-CONFIG” on page 166

This example sets the threshold level for flow control on port 14 to 5000
cells:

awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.14
awplus(config-if)# fctrllimit 5000