Snmp-server enable trap power-inline – Allied Telesis AT-FS970M Series User Manual

Page 291

Text mode
Original mode

AT-FS970M Switch Command Line User’s Guide

291

SNMP-SERVER ENABLE TRAP POWER-INLINE

Syntax

snmp-server enable trap power-inline

Parameters

None

Mode

Global Configuration mode

Description

Use this command to activate the transmission of the SNMP power-inline
trap. The trap is sent if the power requirements of the switch and PDs
exceed the power limit threshold set with “POWER-INLINE USAGE-
THRESHOLD” on page 280.

Confirmation Command

“SHOW RUNNING-CONFIG SNMP” on page 1143

Example

This example enables the SNMP power-inline trap:

awplus> enable
awplus# configure terminal
awplus(config)# snmp-server enable trap power-inline