Allied Telesis AT-FS970M Series - Manual (Page 686)

Chapter 44: Event Log Commands
686
This command is also used to view the configuration of the syslog client.
For information, refer to “SHOW LOG CONFIG” on page 703 in Chapter
46, “Syslog Client Commands” on page 699.
Example
The following command displays the configuration of the event log:
awplus# show log config
Program The software module messages to be
stored in the log. The modules are listed
in Table 79 on page 683. The default is all
modules.
Message Text Text that identifies the messages to be
stored in the log.
Table 80. SHOW LOG CONFIG Command
Field Description