Allied Telesis AT-FS970M Series - Manual (Page 139)

139
Chapter 8
Basic Switch Management Commands
The basic switch management commands are summarized in Table 8.
Table 8. Basic Switch Management Commands
Command Mode Description
“BANNER EXEC” on page 141 Global
Configuration Creates a User Exec and Privileged
Exec modes banner.
“BANNER LOGIN” on page 143 Global
Configuration Creates a login banner.
“BANNER MOTD” on page 145 Global
Configuration Creates a message-of-the-day
banner.
“BAUD-RATE SET” on page 147 Line Console Configures the baud rate of the serial
terminal port on the switch.
“CLOCK SET” on page 148 Privileged Exec Manually sets the date and time.
“ERASE STARTUP-CONFIG” on
page 149 Privileged Exec Restores the default settings to all the
parameter settings on the switch.
“EXEC-TIMEOUT” on page 150 Line Console Sets the console timer which is used
to end inactive management sessions.
“HELP” on page 152 All Displays how to use the on-line help
system.
“HOSTNAME” on page 153 Global
Configuration Assigns a name to the switch.
“LINE CONSOLE” on page 154 Global
Configuration Enters the Line Console mode.
“LINE VTY” on page 155 Global
Configuration Enters the Virtual Terminal Line mode
for a VTY line.
“NO HOSTNAME” on page 156 Global
Configuration Deletes the switch’s name without
assigning a new name.
“PING” on page 157 User Exec and
Privileged Exec Instructs the switch to ping another
network device.
“PING IPv6” on page 159 User Exec and
Privileged Exec Instructs the switch to ping another
IPv6 network device.