beautypg.com

No ip dhcp-relay server-address – Allied Telesis AT-FS970M Series User Manual

Page 484

background image

Chapter 28: DHCP Relay Commands

484

NO IP DHCP-RELAY SERVER-ADDRESS

Syntax

no ip dhcp-relay server-address

ipaddress

Parameters

ipaddress

Specifies the IP address of a DHCP server. You may specify only
one IP address.

Mode

Global Configuration mode

Description

Use this command to delete the IP addresses of the DHCP servers from
the relay agent. You may delete only one address at a time with this
command. To display the IP addresses, refer to “SHOW IP DHCP-
RELAY” on page 487.

Confirmation Command

“SHOW IP DHCP-RELAY” on page 487

Example

This example deletes the IP address 214.154.35.78 of a DHCP server
from the relay agent:

awplus> enable
awplus# configure terminal
awplus(config)# no ip dhcp-relay server-address
214.154.35.78

See also other documents in the category Allied Telesis Computer hardware: