beautypg.com

Ip dhcp-relay server-address – Allied Telesis AT-FS970M Series User Manual

Page 480

background image

Chapter 28: DHCP Relay Commands

480

IP DHCP-RELAY SERVER-ADDRESS

Syntax

ip dhcp-relay server-address

ipaddress

Parameters

ipaddress

Specifies the IP address of a DHCP server. You may specify only
one IP address at a time with this command.

Mode

Global Configuration mode

Description

Use this command to add the IP addresses of DHCP servers to the relay
agent. The agent can have up to five addresses, but you may add only
one address at a time with this command.

Confirmation Command

“SHOW IP DHCP-RELAY” on page 487

Example

This example adds the IP address 149.22.12.56 of a DHCP server to the
relay agent:

awplus> enable
awplus# configure terminal
awplus(config)# ip dhcp-relay server-address 149.22.12.56

See also other documents in the category Allied Telesis Computer hardware: