Allied Telesis AT-FS970M Series - Manual (Page 689)

AT-FS970M Switch Command Line User’s Guide
689
SHOW LOG REVERSE
Syntax
show log reverse
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the event messages in the buffered log from
newest to oldest. This command and the SHOW LOG command display
the same messages, but in different order. The SHOW LOG command
displays the messages from oldest to newest. To cancel the display, type
‘q’ for quit. You cannot filter the log for specific types of messages. For an
example and description of the log, refer to Figure 129 on page 682 and
Table 78 on page 682.
Example
This command displays the event messages in the buffered log from
newest to oldest messages:
awplus# show log reverse