beautypg.com

Service https 1, Browser server with “service https” on – Allied Telesis AT-FS970M Series User Manual

Page 1451

background image

AT-FS970M Switch Command Line User’s Guide

1451

SERVICE HTTPS

Syntax

service https

Parameters

None

Mode

Global Configuration mode

Description

Use this command to activate the HTTPS web server on the switch. The
switch supports secure HTTPS web browser management sessions when
the server is activated. Here are the preconditions to activating the server:

The non-secure HTTP server on the switch must be disabled. For
instructions, refer to “NO SERVICE HTTP” on page 1426.

The switch must have an HTTPS certificate that was designated as
the active certificate with the IP HTTPS CERTIFICATE command.

Confirmation Command

“SHOW IP HTTPS” on page 1455

Example

This example activates the HTTPS web server on the switch:

awplus> enable
awplus# configure terminal
awplus(config)# service https