Allied Telesis AT-FS970M Series - Manual (Page 975)

AT-FS970M Switch Command Line User’s Guide
975
Displaying VLANs
To display the MAC address-based VLANS on the switch, use the SHOW
VLAN MACADDRESS command in the Privileged Exec mode:
awplus# show vlan macaddress
An example is shown in Figure 175.
Figure 175. SHOW VLAN MACADDRESS Command
The fields are described in Table 104 on page 985.
VLAN 5 MAC Associations:
Total number of associated MAC addresses: 5
-------------------------------------------------
MAC Address
Ports
-------------------------------------------------
5A:9E:84:31:23:85
port1.0.13-port1.0.18
1A:87:9B:52:36:D5 port1.0.18
26:72:9A:CB:1A:E4 port1.0.18
89:01:BC:64:95:12 port1.0.18
B2:89:10:02:1C:AE port1.0.18
-------------------------------------------------
VLAN 11 MAC Associations:
Total number of associated MAC addresses: 5
-------------------------------------------------
MAC Address
Ports
-------------------------------------------------
78:3e:56:C8:AE:19
port1.0.8-port1.0.12
AE:4B:76:18:54:C4 port1.0.12
E7:98:03:12:C4:C5 port1.0.12
7B:89:B2:AB:C4:57 port1.0.12
89:EB:7B:34:82:CE port1.0.12
-------------------------------------------------