Allied Telesis AT-FS970M Series - Manual (Page 233)

AT-FS970M Switch Command Line User’s Guide
233
SHOW INTERFACE BRIEF
Syntax
show interface brief
Parameter
None
Modes
Privileged Exec mode
Description
Use this command to display the administrative and link statuses of all of
the ports on the switch. An example of the information is shown in
Figure 54.
Figure 54. SHOW INTERFACE BRIEF Command
The fields are described in Table 14.
Table 14. SHOW INTERFACE BRIEF Command
Field Description
Interface Indicates the port number.
Status Indicates the administrative state of the
port. The administrative state is DOWN if
the port was disabled with the
SHUTDOWN command. Otherwise, the
administrative state of the port is UP. To
disable and enable ports, refer to
“SHUTDOWN” on page 245 and “NO
SHUTDOWN” on page 219, respectively.
Interface StatusProtocol
port1.0.1admin up down
port1.0.2admin up down
port1.0.3admin up down
port1.0.4admin up down
port1.0.5admin up down
port1.0.6admin up down