Allied Telesis AT-FS970M Series - Manual (Page 997)

AT-FS970M Switch Command Line User’s Guide
997
Creating Private VLANs
The command to initially create private VLANs is the PRIVATE-VLAN
command in the VLAN Configuration mode. Here is the command’s
format:
private-vlan vid
The VID number has the range of 2 to 4094. The VID of a private VLAN
must be unique from all other VLANs on the switch.
This example assigns the VID 26 to a new private VLAN:
awplus> enable
awplus# configure terminal
awplus(config)# vlan database
awplus(config-vlan)# private-vlan 26
New private VLANs do not have any host or uplink ports. To add ports,
refer to “Adding Host and Uplink Ports” on page 998.