beautypg.com

No auth reauthentication 5, No auth reauthentication – Allied Telesis AT-FS970M Series User Manual

Page 1105

background image

AT-FS970M Switch Command Line User’s Guide

1105

NO AUTH REAUTHENTICATION

Syntax

no auth reauthentication

Parameters

None

Mode

Port Interface mode

Description

Use this command to remove reauthentication from authenticator ports so
that supplicants do not have to periodically reauthenticate after the initial
authentication. Reauthentication is still required if there is a change to the
status of the link between a supplicant and the switch, or the switch is
reset or power cycled.

Confirmation Command

“SHOW AUTH-MAC INTERFACE” on page 1109

“SHOW DOT1X INTERFACE” on page 1114

Example

This example deactivates reauthentication on port 1.0.2:

awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# no auth reauthentication