beautypg.com

No switchport block egress-multicast – Allied Telesis AT-FS970M Series User Manual

Page 514

background image

Chapter 31: Multicast Commands

514

NO SWITCHPORT BLOCK EGRESS-MULTICAST

Syntax

no switchport block egress-multicast

Parameters

None

Mode

Port Interface mode

Description

Use this command to resume forwarding of egress multicast packets on
ports. By default, this is the default setting on all of the ports on the switch.

Confirmation Command

“SHOW INTERFACE” on page 229

Example

This example resumes forwarding of egress multicast packets on port 19:

awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.19
awplus(config-if)# no switchport block egress-multicast