Allied Telesis AT-FS970M Series - Manual (Page 140)

Chapter 8: Basic Switch Management Commands
140
“REBOOT” on page 160 Privileged Exec Resets the switch.
“RELOAD” on page 161 Privileged Exec Resets the switch.
“SERVICE MAXMANAGER” on
page 162 Global
Configuration Sets the maximum number of
permitted manager sessions.
“SHOW BANNER LOGIN” on
page 163 Privileged Exec Displays the banner set with the
BANNER LOGIN command.
“SHOW BAUD-RATE” on page 164 Global
Configuration Displays the settings of the Console
port.
“SHOW CLOCK” on page 165 User Exec and
Privileged Exec Displays the date and time.
“SHOW RUNNING-CONFIG” on
page 166 Privileged Exec Displays all of the settings on the
switch, including those that have not
yet been saved in the active boot
configuration file.
“SHOW SWITCH” on page 167 Privileged Exec Displays general information about
the switch.
“SHOW SYSTEM” on page 169 User Exec Displays general information about
the switch.
“SHOW SYSTEM SERIALNUMBER”
on page 170 User Exec and
Privileged Exec Displays the serial number of the
switch.
“SHOW USERS” on page 171 Privileged Exec Displays the managers who are
currently logged on the switch.
“SHOW VERSION” on page 173 User Exec and
Privileged Exec Displays the version number and build
date of the management software.
“SNMP-SERVER CONTACT” on
page 174 Global
Configuration Adds contact information to the
switch.
“SNMP-SERVER LOCATION” on
page 175 Global
Configuration Adds location information to the
switch.
“SYSTEM TERRITORY” on page 176 Global
Configuration Specifies the territory of the switch.
Table 8. Basic Switch Management Commands
Command Mode Description