Allied Telesis AT-FS970M Series - Manual (Page 1540)

Chapter 97: ACL Commands
1540
“IP ACCESS-LIST (IP)” on page 1575 IP ACL Defines an ACL that filters IP packets
based on source and destination IP
addresses.
“IP ACCESS-LIST (MAC)” on
page 1578 IP ACL Defines an ACL that filters packets
based on source and destination MAC
addresses.
“IP ACCESS-LIST (PROTO)” on
page 1581 IP ACL Defines an ACL that filters traffic flows
based on protocol numbers and
source and destination IP addresses.
“IP ACCESS-LIST (TCP)” on
page 1584 IP ACL Defines an ACL that filters TCP
packets based on source and
destination IP addresses.
“IP ACCESS-LIST (UDP)” on
page 1588 IP ACL Defines an ACL that filters UDP
packets based on source and
destination IP addresses.
“IPV6 ACCESS-LIST” on page 1592 Global
Configuration Creates an IPv6 ACL and enters the
Configuration IPv6 ACL mode.
“IPV6 ACCESS-LIST (ICMP)” on
page 1593 IPv6 ACL Defines an ACL that filters packets
based on ICMP type and source and
destination IPv6 addresses.
“IPV6 ACCESS-LIST (IP)” on
page 1596 IPv6 ACL Defines an ACL that filters traffic flows
based on the IPv6 source and
destination addresses of the packets.
“IPV6 ACCESS-LIST (PROTO)” on
page 1599 IPv6 ACL Defines an ACL that filters traffic flows
based on protocol numbers and
source and IPv6 destination
addresses.
“IPV6 ACCESS-LIST (TCP)” on
page 1602 IPv6 ACL Defines an ACL that filters packets
based on TCP type and source and
destination IPv6 addresses.
“IPV6 ACCESS-LIST (UDP)” on
page 1606 IPv6 ACL Defines an ACL that filters packets
based on UDP type and source and
destination IPv6 addresses.
“IPV6 TRAFFIC-FILTER” on
page 1610 Port Interface Assigns an IPv6 ACL to an interface.
“MAC ACCESS-GROUP” on
page 1611 Global
Configuration Adds MAC address ACLs to ports on
the switch.
Table 188. Access Control List Commands (Continued)
Command Mode Description