Allied Telesis AT-FS970M Series - Manual (Page 1316)

Chapter 80: RMON
1316
awplus(config-if)# rmon collection stats 16
awplus(config-if)# exit
awplus(config)# interface port1.0.20
awplus(config-if)# rmon collection stats 20
You can now use your SNMP program and the RMON section of the MIB
tree to view the RMON statistics of the ports. This assumes, of course,
that SNMP is activated and configured on the switch.
Viewing Statistics
Groups
To confirm the configuration, use the SHOW RMON STATISTICS
command in the Privilege Exec mode:
awplus# show rmon statistics
Here is an example of the information.
Figure 223. SHOW RMON STATISTICS Command
The fields are described in Table 145 on page 1352.
Deleting Statistics
Groups
To delete RMON statistics groups from the ports on the switch, use the
NO RMON COLLECTION STATS command in the Port Interface mode.
This example of the command removes the group from port 5:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.5
awplus(config-if)# no rmon collection stats 5
Stats Index = 5
Data source ifindex = 5
Owner Agent
Stats Index = 16
Data source ifindex = 16
Owner Agent
Stats Index = 20
Data source ifindex = 20
Owner Agent