Allied Telesis AT-FS970M Series - Manual (Page 809)

809
Chapter 55
RSTP Commands
The RSTP commands are summarized in Table 91 and described in detail
within the chapter.
Table 91. Rapid Spanning Tree Protocol Commands
Command Mode Description
“NO SPANNING-TREE PORTFAST”
on page 811 Port Interface Removes ports as edge ports on the
switch.
“NO SPANNING-TREE
ERRDISABLE-TIMEOUT ENABLE”
on page 812 Global
Configuration Deactivates the RSTP BPDU guard
timer.
“NO SPANNING-TREE LOOP-
GUARD” on page 813 Port Interface Disables the BPDU loop-guard feature
on the ports.
“NO SPANNING-TREE PORTFAST
BPDU-GUARD” on page 814 Port Interface Disables the BPDU guard feature on a
port.
“NO SPANNING-TREE RSTP
ENABLE” on page 815 Global
Configuration Disables RSTP on the switch.
“SHOW SPANNING-TREE” on
page 816 User Exec and
Privileged Exec Displays the RSTP settings on the
switch.
“SPANNING-TREE ERRDISABLE-
TIMEOUT ENABLE” on page 818 Global
Configuration Activates the RSTP BPDU guard
timer.
“SPANNING-TREE ERRDISABLE-
TIMEOUT INTERVAL” on page 819 Global
Configuration Specifies the duration the RSTP
BPDU guard timer.
“SPANNING-TREE FORWARD-TIME”
on page 820 Global
Configuration Sets the forward time, which specifies
how long ports remain in the listening
and learning states before they
transition to the forwarding state.
“SPANNING-TREE GUARD ROOT”
on page 821 Port Interface Enables the Root Guard feature on a
port.
“SPANNING-TREE HELLO-TIME” on
page 822 Global
Configuration Sets the hello time, which defines how
frequently the switch sends spanning
tree configuration information when it
is the root bridge or is trying to
become the root bridge.