No aaa authentication dot1x default group radius 2, No aaa authentication dot1x default group radius – Allied Telesis AT-FS970M Series User Manual

Page 1102

Text mode
Original mode

Chapter 70: 802.1x Port-based Network Access Control Commands

1102

NO AAA AUTHENTICATION DOT1X DEFAULT GROUP RADIUS

Syntax

no aaa authentication dot1x default group radius

Parameters

None

Mode

Global Configuration mode

Description

Use this command to disable 802.1x port-based network access control
on the switch. All ports forward packets without any authentication. This is
the default setting.

Confirmation Command

“SHOW DOT1X” on page 1113

Example

This example disables 802.1x port-based network access control on the
switch:

awplus> enable
awplus# configure terminal
awplus(config)# no aaa authentication dot1x default group
radius