beautypg.com

Shutdown – Allied Telesis AT-FS970M Series User Manual

Page 245

background image

AT-FS970M Switch Command Line User’s Guide

245

SHUTDOWN

Syntax

shutdown

Parameter

None

Mode

Port Interface mode

Description

Use this command to disable ports. Ports that are disabled do not forward
traffic. You might disable ports that are unused to secure them from
unauthorized use or that are having problems with network cables or their
link partners. The default setting for the ports is enabled.

To reactivate a port, refer to “NO SHUTDOWN” on page 219.

Confirmation Command

“SHOW INTERFACE” on page 229

Example

This example disables ports 15 and 16:

awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.15,port1.0.16
awplus(config-if)# shutdown