Allied Telesis AT-FS970M Series - Manual (Page 1386)

Chapter 85: Telnet Server Commands
1386
SHOW TELNET
Syntax
show telnet
Parameters
None
Mode
User Exec mode and Privileged Exec mode
Description
Use this command to display the status of the Telnet server on the switch.
The status of the server can be either enabled or disabled. Here is the
information.
Figure 233. SHOW TELNET Command
Example
This example displays the status of the Telnet server on the switch:
awplus# show telnet
Telnet Server Configuration
-------------------------------------------
Telnet server : Enabled