Allied Telesis AT-FS970M Series - Manual (Page 782)

Chapter 53: STP Commands
782
“SPANNING-TREE PORTFAST
BPDU-GUARD” on page 793 Port Interface Enables the BPDU guard feature on a
port so that the switch monitors edge
ports and disables them if they receive
BPDUs.
“SPANNING-TREE PRIORITY (Bridge
Priority)” on page 794 Global
Configuration Assigns the switch a priority number.
“SPANNING-TREE Priority (Port
Priority)” on page 795 Port Interface Assigns a priority value to a port.
“SPANNING-TREE STP ENABLE” on
page 796 Global
Configuration Enables STP on the switch.
Table 88. Spanning Tree Protocol Commands (Continued)
Command Mode Description