No snmp-server 9, No snmp-server – Allied Telesis AT-FS970M Series User Manual

Page 1159

Text mode
Original mode

AT-FS970M Switch Command Line User’s Guide

1159

NO SNMP-SERVER

Syntax

no snmp-server

Parameters

None

Mode

Global Configuration mode

Description

Use this command to disable SNMPv1, SNMPv2c, and SNMPv3 on the
switch. The switch does not permit remote management from SNMP
applications when SNMP is disabled. It also does not send SNMP trap or
inform messages.

Confirmation Command

“SHOW SNMP-SERVER” on page 1166.

Example

This example disables SNMPv1, SNMPv2c, or SNMPv3 on the switch:

awplus> enable
awplus# configure terminal
awplus(config)# no snmp-server