Allied Telesis AT-FS970M Series - Manual (Page 658)

Chapter 42: DHCP Snooping Commands
658
SHOW IP SOURCE BINDING
Syntax
show ip source binding
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display static entries in the DHCP snooping
database. The static entries have been added with the IP SOURCE
BINDING command. See “IP SOURCE BINDING” on page 642
Example
This example displays static entries in the DHCP snooping database:
awplus> enable
awplus# show ip source binding
See Figure 127 for a sample of this display. See Table 75 on page 659 for
an explanation of the parameters in this display.
Figure 127. SHOW IP DHCP SOURCE BINDING Command
awplus# show ip dhcp source binding
IP Source Bindings:
Client MAC Expires
IP Address Address VLAN Port (sec) Type
---------------------------------------------------------------------------
1.1.1.1
0000.1111.2222 1 port1.0.21 Infinite Static