Allied Telesis AT-FS970M Series - Manual (Page 749)

AT-FS970M Switch Command Line User’s Guide
749
SHOW PORT ETHERCHANNEL
Syntax
show port etherchannel [interface port]
Parameters
port
Specifies the port of an aggregator. You can display more than one
port at a time.
Mode
Privileged Exec mode
Description
Use this command to display the LACP port information. Figure 143
illustrates the information. Refer to the IEEE 802.3ad standard for
definitions of the fields.
Figure 143. SHOW PORT ETHERCHANNEL Command
Example
This example displays the LACP port information for port 5:
awplus# show port etherchannel port1.0.5
Link: port: 1.0.5
Aggregator # 2
Receive machine state: Defaulted
Periodic Transmission machine state: Slow periodic
Mux machine state: Detached
ACTOR PARTNER
=========================================================================
Actor Port ............. 05 Partner Port ......... 00
Selected ............... UNSELECTED Partner System ....... 00-00-00-00-00-00
Oper Key ............... 0x0001 Oper Key ............ 0x0000
Oper Port Priority .... 0x0005 Oper Port Priority ... 0x0000
Individual ............. NO Individual ........... YES
Synchronized............ NO Synchronized.......... NO
Collecting ............ NO Collecting ........... NO
Distributing ........... NO Distributing ......... NO
Defaulted .............. YES Defaulted ............ NO
Expired ................ NO Expired .............. NO
Actor Churn .......... NO Partner Churn ........ NO