beautypg.com

Show etherchannel, Figure 139. show etherchannel command – Allied Telesis AT-FS970M Series User Manual

Page 744

background image

Chapter 50: LACP Commands

744

SHOW ETHERCHANNEL

Syntax

show etherchannel

id_number

Parameters

id_number

Specifies the ID number of the aggregator.

Mode

Privileged Exec mode

Description

Use this command to display the ports of specific aggregators on the
switch. Figure 139 illustrates the information.

Figure 139. SHOW ETHERCHANNEL Command

Example

This example displays the ports of the aggregator with the ID number 22:

awplus# show etherchannel 22

Aggregator #2 .... po2

Admin Key: 0xff01 - Oper Key: 0x0101

Link: Port1.0.2

sync

Link: Port1.0.3

sync

Link: Port1.0.4

sync

Link: Port1.0.5

sync

Link: Port1.0.6

sync