Allied Telesis AT-FS970M Series - Manual (Page 1107)

AT-FS970M Switch Command Line User’s Guide
1107
NO DOT1X PORT-CONTROL
Syntax
no dot1x port-control
Parameters
None
Mode
Port Interface mode
Description
Use this command to remove ports from the authenticator role so that they
forward traffic without authentication.
Confirmation Command
“SHOW AUTH-MAC INTERFACE” on page 1109 or “SHOW DOT1X
INTERFACE” on page 1114
Example
This example removes port 1.0.14 from the authenticator role:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.14
awplus(config-if)# no dot1x port-control