Allied Telesis AT-FS970M Series - Manual (Page 1877)

AT-FS970M Switch Command Line User’s Guide
1877
SHOW IP RIP COUNTER
Syntax
show ip rip counter
Parameters
None
Mode
User Exec and Privileged Exec modes
Description
Use this command to display counters for RIP packets on the switch.
Figure 285 provides an example of information that the command
displays.
Figure 285. SHOW IP RIP COUNTER Command
The fields are described in Table 258.
Table 258. SHOW IP RIP COUNTER Command
Parameter Description
Input: Indicates that the counters are for
incoming RIP packets.
inResponses Displays the number of response packets
received.
inRequests Displays the number of request packets
received.
IP RIP Counter Summary
Input:
inResponses......................5
inRequests.......................1
inDiscards.......................0
Output:
outResponses.....................6
outRequests......................2
outTrigResponses.................0
outErrors........................0