Allied Telesis AT-FS970M Series - Manual (Page 307)

307
Chapter 14
IPv4 and IPv6 Management Address
Commands
The IPv4 and IPv6 management address commands are summarized in
Table 28.
Table 28. Management IP Address Commands
Command Mode Description
“CLEAR IPV6 NEIGHBORS” on
page 309 Privileged Exec Clears all dynamic IPv6 neighbor
entries.
“IP ADDRESS” on page 310 VLAN Interface Assigns the switch a static IPv4
management address.
“IP ADDRESS DHCP” on page 312 VLAN Interface Assigns the switch an IPv4
management address from a DHCP
server on your network.
“IP ROUTE” on page 314 Global
Configuration Assigns the switch an IPv4 default
gateway address.
“IPV6 ADDRESS” on page 316 VLAN Interface Assigns the switch a static IPv6
management address.
“IPV6 ROUTE” on page 318 Global
Configuration Assigns the switch an IPv6 default
gateway address.
“NO IP ADDRESS” on page 320 VLAN Interface Deletes the IPv4 management
address.
“NO IP ADDRESS DHCP” on
page 321 VLAN Interface Deactivates the IPv4 DHCP client on
the switch.
“NO IP ROUTE” on page 322 Global
Configuration Deletes the IPv4 default gateway.
“NO IPV6 ADDRESS” on page 323 VLAN Interface Deletes the IPv6 management
address.
“NO IPV6 ROUTE” on page 324 Global
Configuration Deletes the IPv6 default gateway.
“SHOW IP INTERFACE” on page 325 Privileged Exec Displays the IPv4 management
address.
“SHOW IP ROUTE” on page 326 Privileged Exec Displays the IPv4 management
address and default gateway.