Allied Telesis AT-FS970M Series - Manual (Page 600)

Chapter 39: IGMP Snooping Commands
600
Example
The following example displays the IGMP snooping parameters:
awplus# show ip igmp snooping
Port/Trunk ID The port of a multicast router. If the switch
learned a router on a port trunk, the trunk
ID number, instead of a port number, is
displayed.
Router IP The IP addresses of the multicast routers.
Exp. Time The number of seconds remaining before
the switch times out a multicast router if
there are no further IGMP queries from it.
Host List
Number of IGMP Multicast
Groups The number of IGMP multicast groups
that have active host nodes on the switch.
Multicast Group The multicast addresses of the groups.
ID The ID numbers of the VLANs of the host
nodes.
Port/Trunk ID The ports of the host nodes. If the host
nodes are on port trunks, this field
displays the trunk ID numbers instead of
the port numbers.
HostIP The IP addresses of the host nodes.
IGMP Ver. The IGMP versions used by the host
nodes.
Exp. Time The number of seconds remaining before
host nodes are timed out if they do not
send IGMP reports.
Table 61. SHOW IP IGMP SNOOPING Command (Continued)
Parameter Description