beautypg.com

Switchport port-security aging 4, Switchport port-security aging – Allied Telesis AT-FS970M Series User Manual

Page 1034

background image

Chapter 68: MAC Address-based Port Security Commands

1034

SWITCHPORT PORT-SECURITY AGING

Syntax

switchport port-security aging

Parameters

None

Mode

Port Interface mode

Description

Use this command to configure the ports to add the source MAC
addresses as dynamic MAC address in the MAC address table. Ports that
learn their maximum numbers of addresses can learn new addresses as
inactive addresses are deleted from the table.

Confirmation Command

“SHOW PORT-SECURITY INTERFACE” on page 1028

Example

This example sets port 2 to store its learned MAC addresses as dynamic
addresses in the MAC address table:

awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# switchport port-security aging

See also other documents in the category Allied Telesis Computer hardware: